|
Staber Washing Machine Specifications
Models: HXW 2304/2404/2504
· TIME BREAKDOWN PER MAXIMUM LOAD OF CLOTHES
PREWASH = 5 MIN. PLUS FILL TIME
WASH TIME = UP TO 15 MIN. PLUS FILL TIME
RINSE TIME = TWO 5 MIN. RINSES PLUS FILL TIME
SPIN TIME = 5 MIN.
DECAKE/INDEX TIME = 3 MIN.
(Fill time is determined by water inlet pressure)
· WATER USE PER LOAD IN EACH CYCLE
NORMAL LOW
NORMAL = 16.5 GAL 12 GAL
PERMANENT PRESS = 16.5 GAL 12 GAL
DELICATE = 16.5 GAL 12 GAL
PRE-WASH & NORMAL = 22 GAL
· NORMAL HOT TO COLD USAGE (THIS IS DIRECTLY RELATED TO THE TEMPERATURE
AND WATER LEVEL SELECTION)
WATER LEVEL/TEMP HOT COLD
NORMAL/HOT 5.5 GAL 11 GAL
NORMAL/ WARM 2.7 GAL 13.7 GAL
NORMAL/ COLD - 16.5 GAL
· CLOTHES CAPACITY PER LOAD
UP TO 18 LB.
· DETERGENT USE PER NORMAL LOAD
1 OZ. MAX
· WATTS OF ELECTRICITY PER LOAD
110-150 WATT HOURS
· MOTOR TYPE
UNIVERSAL/DIGITAL-ELECTRONICALLY CONTROLLED MOTOR
· MOTOR H.P. RATING
LESS THAN ½
· MOTOR AMPS BEING DRAWN IN WASH
~ 4 TO ~ 5 AMPS
· MOTOR AMPS BEING DRAWN DURING SPIN
~ 2 AMPS
· SPIN CYCLE RPM
~ 400 (DELICATE & PERM)
~ 600 up to 800 (NORMAL)
· EXTRACTION FORCE
~ 200 G's
· TYPE OF DRAIN CYCLE
SELF CLEANING ELECTRIC WATER PUMP
· THE INNER DRUM DIAMETER
~ 23" GIVING ~ 2 CUBIC FEET OF USABLE VOLUME
· INNER & OUTER TUB MATERIAL
STAINLESS STEEL
· AUTOMATIC DISPENSERS
PREWASH DETERGENT, DETERGENT, BLEACH, SOFTENER
· SIZE OF MACHINE IN INCHES
WIDTH = 27
DEPTH = 26
BACK HEIGHT = 42
HEIGHT WITH DOOR UP = 55
· MACHINE WEIGHT
NET = 175 LBS.
SHIPPING = 240 LBS.
· REPAIR FACILITIES AND ARRANGEMENTS
The unit comes with a manufacturer's warranty on parts. The Staber System
2000 is designed to be serviced by the end user. Total front access and
simple design allows the user to maintain and service their machine without
having to pay large repair bills. Staber Industries offers a toll-free
Technical Assistance Hotline (1-800-848-6200) for guidance on do-it-yourself
maintenance and repair. All replacement parts are shipped factory direct
by FedEx or UPS to the end user.
· WARRANTY
Length of Warranty From Date of Installation
-One Year Full Warranty
-Five Year Limited Warranty
-Ten Year Limited Warranty
-Twenty-Five Year Limited Warranty
Staber Industries Will Pay For:
-One Year: Replacement parts and repair labor to correct defects in materials
or workmanship.
-Five Year: Replacement parts for the Bearing Assembly and Suspension
System if defective in materials or workmanship.
-Ten Year: Replacement of the Top, Lid, or Base if defective in materials
or workmanship.
-Twenty-Five Year: Replacement parts and repair labor for the Outer Tub
Module if the tub develops a water leak caused by rust-through as a result
of defective materials or workmanship.
|
